It is the duty and desire of electricians to have all components functioning in the most optimal level. Malfunction is often caused by damages, poor installation work, corrosion or even contamination. The most common sign of a problem in the system is excessive heat resulting from poor conductivity. If left unchecked, the results can range from unnecessary and costly power disruption to very catastrophic events such as electrocution and fires. Initially, more costly and time consuming physical inspection was the only dependable way to keep the system safe but engineers are now migrating to electrical infrared inspection method which has proven not only cheaper but more effective.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The devices that requires infrared surveys are the bus ducts, the distribution center, the distribution panels, receptacle panel, the transformers, lighting system, switchgears, disconnects and other components that make up the system. If well done, the uninterruptable power supply can be achieved as there is no need to shut down the system. The process of inspection takes place under the normal load without any disturbance to normal supply.
If you choose to use this form of testing, there is no need to shut down any part of the system as the testing is non-contact and nondestructive (NDT) at the same time. This means that all components can be inspected under their normal loads in the normal operating system. It involves scanning with the aim of revealing improper connections, damages and any form of flaws well in advance before they can result to any disaster.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
In order to fully benefit from this cutting edge technology, you must be very keen on the companies you choose for the job. At minimum, the prospective company must have some proven record of good job done on previous assignments. For a good choice, the level of experience of staff also matters.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The devices that requires infrared surveys are the bus ducts, the distribution center, the distribution panels, receptacle panel, the transformers, lighting system, switchgears, disconnects and other components that make up the system. If well done, the uninterruptable power supply can be achieved as there is no need to shut down the system. The process of inspection takes place under the normal load without any disturbance to normal supply.
If you choose to use this form of testing, there is no need to shut down any part of the system as the testing is non-contact and nondestructive (NDT) at the same time. This means that all components can be inspected under their normal loads in the normal operating system. It involves scanning with the aim of revealing improper connections, damages and any form of flaws well in advance before they can result to any disaster.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
In order to fully benefit from this cutting edge technology, you must be very keen on the companies you choose for the job. At minimum, the prospective company must have some proven record of good job done on previous assignments. For a good choice, the level of experience of staff also matters.
About the Author:
If you need information about electrical infrared inspection, pay a visit to the web pages here today. You can see details at http://www.infraredscanningservice.com now.
No comments:
Post a Comment