If you are interested in military or aviation technology, you see one piece of equipment mentioned time and time again. Radar (short for Radio Detection And Ranging) is a way of locating objects and telling important information such as the direction in which those objects are traveling, how far away they are from a given point and how fast the object is traveling. The monopulse comparator is an important component of modern radar systems and has done much to make these systems more reliable and accurate.
Police officers routine use radar guns to determine whether vehicles are speeding. The signal will bounce out of a hand held device (known as a gun), bounce off of the targeted vehicle, and return in such a way that the officer can tell how fast that vehicle is going. The officer can then decide whether or not any traffic laws have been broken and whether a vehicle should be ticketed.
Anyone who has seen a weather forecast has taken advantage of the information that radar can give us. Meteorologists will use the information given to them by Doppler radar to track changes in weather systems. It can help alert us to the formation of storm fronts which may develop from thunderstorms to tornadoes or hurricanes.
While many people think that these systems can just be used on land, this is not true. Marine radar will bounce signals off of nearby objects. This shows a ship where it is (by detecting the shoreline or marine buoys) or whether there are other ships in the same area.
A radar system is made up of a transmitter, waveguide, duplexer, receiver and a display processor. The transmitter generates the radio frequency which will be used to detect objects. There is a waveguide that is used to connect the transmitter with an antenna that will send the radio frequency out into the environment. A duplexer is then used to switch the antenna from transmitting to receiving and the resulting signal is captured by the receiver and displayed on the display processor.
Jamming was an issue in the past but it is not as much of a problem with the modern monopulse systems that are being used. Because these systems rely on radio frequencies to detect objects, if a radio signal of the same frequency was directed at the radar system itself it tended to interfere with the signal and the system could not produce an accurate image. The monopulse system, because of the way it is set up, makes jamming much more difficult.
A comparator allows for a radar beam to split into multiple segments. Originally the beam was split into two sections although now there are comparators which allow for a beam to be split into four sections instead. When the beams are compared, the slight differences in position between each of the beams allows the radar system to more precisely locate where a particular object it is or how fast it is moving.
If you are interested in taking a closer look at these items you will quickly learn that there are different types. Looking online will give you the most comprehensive information on the different variants available although you may find you will need to check out specialized websites in order to view them.
Police officers routine use radar guns to determine whether vehicles are speeding. The signal will bounce out of a hand held device (known as a gun), bounce off of the targeted vehicle, and return in such a way that the officer can tell how fast that vehicle is going. The officer can then decide whether or not any traffic laws have been broken and whether a vehicle should be ticketed.
Anyone who has seen a weather forecast has taken advantage of the information that radar can give us. Meteorologists will use the information given to them by Doppler radar to track changes in weather systems. It can help alert us to the formation of storm fronts which may develop from thunderstorms to tornadoes or hurricanes.
While many people think that these systems can just be used on land, this is not true. Marine radar will bounce signals off of nearby objects. This shows a ship where it is (by detecting the shoreline or marine buoys) or whether there are other ships in the same area.
A radar system is made up of a transmitter, waveguide, duplexer, receiver and a display processor. The transmitter generates the radio frequency which will be used to detect objects. There is a waveguide that is used to connect the transmitter with an antenna that will send the radio frequency out into the environment. A duplexer is then used to switch the antenna from transmitting to receiving and the resulting signal is captured by the receiver and displayed on the display processor.
Jamming was an issue in the past but it is not as much of a problem with the modern monopulse systems that are being used. Because these systems rely on radio frequencies to detect objects, if a radio signal of the same frequency was directed at the radar system itself it tended to interfere with the signal and the system could not produce an accurate image. The monopulse system, because of the way it is set up, makes jamming much more difficult.
A comparator allows for a radar beam to split into multiple segments. Originally the beam was split into two sections although now there are comparators which allow for a beam to be split into four sections instead. When the beams are compared, the slight differences in position between each of the beams allows the radar system to more precisely locate where a particular object it is or how fast it is moving.
If you are interested in taking a closer look at these items you will quickly learn that there are different types. Looking online will give you the most comprehensive information on the different variants available although you may find you will need to check out specialized websites in order to view them.
About the Author:
You can visit etiworld.com for more helpful information about How The Monopulse Comparator Has Improved Modern Radar Systems.
No comments:
Post a Comment